The range fill overlay displays a filled area extending from a low value to a high value for each bar.  If the high is lower than the low for a given bar, the area is inverted.  The overlay has the following type-specific settings:

Settings Page

·High - Value source to use for the high of the range.

·Low - Value source to use for the low of the range.

·Fill - Fill style for bars.

·Show High Edge - If checked, an edge line is drawn connecting the high bar values.

·High Edge Line - Line style for high edge.  If Show High Edge is not checked, this setting is not available.

·Show Low Edge - If checked, an edge line is drawn connecting the low bar values.

·Low Edge Line - Line style for low edge.  If Show Low Edge is not checked, this setting is not available.

·Use Step - If checked, bars are connected with horizontal lines at each bar value and a vertical line stepping between the two.  If not checked, bars are connected with a straight line between bar values.

For further information on common overlay settings, please consult the Common Settings topic.  For further information on changing fill or line style settings, please consult the Chart Fill Settings or Chart Line Settings topics.